Samsung OfficeServ 7200 Technical Manual page 85

Hide thumbs Also See for OfficeServ 7200:

Table of Contents

OfficeServ 7200

TECHNICAL MANUAL

7B/SINGLE LINE ULTRA BASE WEDGE

Figure 7.26 Attaching 7B/Single Line to AOM and 7B/Single Line to 64 BM

ATTACHING iDCS 14 BUTTON MODULES TO AN iDCS KEYSET

To add an iDCS 14 Button Key Strip to your iDCS keyset follow these steps

7.28).

1) Place the keyset face down on a flat surface.

2) Remove the base pedestal by placing your thumbs over the attachment clips and

press outward while simultaneously pressing down on the keyset body with your

fingertips.

3) Remove the ribbon cable knockout from the bottom of the keyset.

4) Clip the 14 button strip to the side of the keyset.

5) Plug one end of the ribbon cable into the keyset and the other end into the 14

button strip.

7B / SINGLE LINE ULTRA BASE WEDGE

METAL CONNECTOR CLIP

7.20

Home Page

PART 7 SEPTEMBER 2005

AOM ULTRA BASE WEDGE

64BM ULTRA BASE WEDGE

Table of Contents

INSTALLATION

(see Figure

Table of Contents