Samsung OfficeServ 7200 Technical Manual page 38

Table of Contents
Home Page
OfficeServ 7200 INSTALLATION
TECHNICAL MANUAL PART 3 SEPTEMBER 2005
3.3.7 8COMBO
This board provides 8 ports for connecting analog stations and 8 ports for connecting
Samsung Digital Keysets. This board can go into slots 1 through 5 in either cabinet. Add
as many as needed.
FRONT VIEW OF 8COMBO BOARD
The front view of the 8COMBO board is shown in the picture below.
Figure 3.21 Front View of the 8COMBO
• Ports S1 ~ S8 are for analog stations only.
• Ports D1 ~ D8 are for Samsung Digital Stations only.
See sections 7.1.2 and 7.1.3 for port Pinout/wiring.
3.3.8 16SLI2/16MWSLI
This board provides 16 ports for connecting analog stations. It can go into slots 1
through 5 in either cabinet. Add as many as needed. This card automatically detects
DTMF or dial pulse signals from the SLT. This card has no DTMF receiver. It will share
the system resources. If there is a high concentration of SLI cards, and MFM daughter
board must be added to relieve congestion. MFM can be added to the MCP.
3.20