Samsung OfficeServ 7200 Technical Manual page 72

OfficeServ 7200
TECHNICAL MANUAL
CONNECTING TO THE 16DLI2 BOARD
Pin No. 1
Function -
CONNECTING TO THE 8COMBO BOARD
Pin No.
Function
1) Connect the Door Box port of the DPIM to the Line port of the door phone.
2) When using an automatic door lock, connect the Lock port of the DPIM and the
door phone contact point to the door lock.
3) The door lock contact point is designed to control low-voltage relay and uses 24 VDC
and 100 mA. Do not attempt to connect commercial AC power to these contact.
MMC
MMC 211
program duration of contact closure.
program, refer to OfficeServ 7200 Programming Section.
2 3 4
- - DLI 1 TIP DLI 1 RING
Figure 7.10 RJ-45 Port of 16DLI2 (For Door Phone)
1 2 3
- - -
Figure 7.11 RJ-45 Port of the 8COMBO Board (For Door Phone)
is used to assign call numbers to door phones. Use
7.7
Home Page
PART 7 SEPTEMBER 2005
P1~P8
(RJ-45)
5 6 7
- -
P9~P16
Port
4 5 6
DLI DLI -
TIP RING
For detailed instruction on the MMC
Table of Contents
INSTALLATION
8
-
7 8
- -
MMC 501 to