Samsung OfficeServ 7200 Technical Manual page 5

Table of Contents
Home Page
OfficeServ 7200 INSTALLATION
TECHNICAL MANUAL TABLE OF CONTENTS SEPTEMBER 2005
FIGURE 7.19: Connecting a Single Line Telephone to a KDB-SLI
FIGURE 7.20: Connecting a Station Device to a KDB via MDF
FIGURE 7.21: Wall-Mounting a Keyset
FIGURE 7.22: Ultra Base Wedge
FIGURE 7.23: Wall-Mounting an iDCS Keyset
FIGURE 7.24: Attaching 24B/12B to 64BM
FIGURE 7.25: Attaching 24B/12B to AOM
FIGURE 7.26: Attaching 7B/Single Line to AOM and 7B/Single Line to 64 BM
FIGURE 7.27: Attaching iDCS 64 Button Module to an iDCS Keyset
FIGURE 7.28: Attaching iDCS 14 Button Module to an iDCS Keyset
FIGURE 7.29: Connecting MOH/BGM Sources
FIGURE 7.30: Connecting External/Additional Page Equipment
FIGURE 7.31: Connecting Common Bell
FIGURE 7.32: OSM Connection to LIM Board via LAN
FIGURE 7.33: OSM Screen
FIGURE 7.34: Setting OSM Parameters
FIGURE 7.35: Connecting SMDR to the LAN Port of the LIM Board
TABLES
TABLE 1.1: Power Specifications
TABLE 3.1: Applicable Boards per Slot
TABLE 3.2: Back Panel Parts
TABLE 3.3: Types of Control Boards
TABLE 3.4: Ports and LEDs of the MCP Board
TABLE 3.5: Ports and LEDs of the LCP
TABLE 3.6: Types of Interface Board and Applicable Slots
TABLE 3.7: Ports and LEDs of the TEPRI
TABLE 3.8: Ports and LEDs of the 8TRK
TABLE 3.9: Ports of the 16SLI2
TABLE 3.10: Ports and LEDs of the 8DLI Board