Table of Contents
Advertisement
Manuals: Link to microHAM manuals located on your system.
Setup Guides: Link to software configuration guides for many common applications. Documents must be
installed from installation CD-ROM or downloaded by invoking Download Documents menu item.
Cable Schematics: Link to cable diagrams. Documents must be installed from installation CD-ROM or
downloaded by invoking Download Documents menu item.
Download Documents: Downloads microHAM documentation including updated manuals and setup guides.
You may specify the products for which you want documentation.
NOTE: Requires an internet connections.
microHAM Home Page: Link to
microHAM Downloads Page: Link to
Show Tooltips: When checked, small, single line help is displayed below the mouse cursor.
Update Router: Download and install the most recent version of Router.
IMPORTANT: Whenever it is possible, always perform Router upgrade here!
About: Shows the Router's internal version number.
There are six (6) tabs for configuring Station Master. Each tab controls part of Station Master's functions.
Except for Antenna Switching & PTT Sequencer and Rotator, any change is applied immediately.
Ports: assign virtual ports to the Station Master for use by applications
●
Antenna Switching & PTT Sequencer: contains six sub-tabs for configuring antenna selections,
●
antenna definitions, rotor, and sequencer operation.
Rotator: configures internal Rotator controller parameters
●
Keyboard: configures operation of PS/2 keyboard or keypad
●
Display: configures operation of the LCD display.
●
System Settings: configures power control and displays system power
●
microHAM © 2016 All rights reserved
HELP MENU
www.microHAM.com
www.microham.com/contents/en-us/d29.html
DEVICE CONFIGURATION TABS
19
Advertisement
Table of Contents
