Rear Panel - microHAM STATION MASTER Manual

1. DC 13.8V
Power Supply - 2.1 x 5.5 mm coaxial jack, center is positive (+).
IMPORTANT: Be sure to observe the proper polarity!
2. iLINK
MiniDIN-6 for connection with microHAM MKII, MK2R or function expansion module.
3. USB
USB B connector for computer connection.
Standard USB A-B cable.
4. SERIAL
RS232 level serial port.
DB9 female jack.
See Appendix "Connectors" for details.
5. PA
DB15 female jack for connection with Power Amplifier.
Compatible with microHAM "CAT" cables
See Appendix "Connectors" for details.
6. PORT A
DB25 female jack for antenna switch connection.
See Appendix "Connectors" for details.
7. PS/2
MiniDIN6 for PS/2 keyboard or PS/2 keypad.
8. INHIBIT
Power inhibit output for Yaesu transceivers.
RCA jack TIP - Signal SHELL - GND
9. CAT
4 pole 3.5mm phone jack for transceiver control. Compatible with microHAM "CAT" cables.
10. GND
Terminal for connection to station ground.
microHAM © 2016 All rights reserved

Rear Panel

6