Menu: Virtual Port - microHAM STATION MASTER Manual

NOTE: When upgrading Router, the upgrade will include the latest firmware for Station Master. If the firmware
is newer than the currently installed firmware, Router will automatically ask for permission to update the
installed firmware the first time it connects to Station Master.
NOTE: After a major version change, the Antenna Switching and Rotator configuration data in the Station
Master EEPROM may need to be replaced due to changes in the organization and content of the
configuration data. After uploading firmware, Station Master will prompt you to clear the old
configuration by pressing the FUNC button. After clearing the memory, upload the Antenna Switching
and the Rotator configuration data by by pressing the Store button on the appropriate tabs in Router.
It is necessary to create a number of virtual serial ports (COM ports) in order for a Windows application (logging,
control or digital mode program) to access microHAM devices.
microHAM © 2016 All rights reserved
VIRTUAL PORT MENU
Create - Creates virtual COM ports. It is possible to
select more ports at once by holding the Control key
on the keyboard and clicking on COM port numbers.
Creating a virtual port may take a while, be patient.
Delete - Deletes any single virtual port.
Delete All - Deletes all previously created virtual ports
and resets Virtual Serial Port bus.
Do not delete a virtual port unless all applications
using that port have been closed.
NOTE: Properly working ports should not display an
exclamation mark (!).
18