Important Warnings - microHAM STATION MASTER Manual

Internal Rotator Control:
Three (3) programmable relay outputs
•
Both poles of relay contact available
•
Configurable support for BRAKE or SPEED control
•
Support for multi-turn rotators
•
Support for rotators with analog (pot) or discrete (pulse) azimuth read back
•
Programmable software limit switches
•
Dead zone definition
•
Target finding strategy selection for optimal handling
•
Support for "slipping" rotators
•
Four memories for most wanted azimuths
•
Automatic azimuth control from logger
•
Virtual Rotator Control:
Unlimited number of antennas can be joined to Virtual Rotator
•
Programmable azimuth ranges for each Virtual Rotator antenna
•
Automatic azimuth control from logger
•
Unlimited number of Virtual Rotators per Band
•
Power Amplifier Control:
Automatic tuning for CI-V controlled automatic amplifiers (Icom PW1, Expert SPE)
•
Automatic band switching for BCD controlled amplifiers (Yaesu VL-1000, FL-7000)
•
Support for QSK Power Amplifiers
•
ALWAYS check the polarity of the 13.8 V power supply.
DO NOT perform any upgrade through Station Master.
microHAM © 2016 All rights reserved

2 - IMPORTANT WARNINGS

If your radio includes upgradeable firmware
4