Display Tab - microHAM STATION MASTER Manual

The display tab provides controls for configuring the SM display.
Each line can display one of eight default (background) functions and any of "temporary" status reports. The
"background" functions are those that appear at idle. The status messages appear depending on operating
status.
Contrast: controls the LCD contrast
Light: sets the LCD backlight brightness
Report time: sets the length of time that transient (status change) reports remain visible
Set Strings: set the "Welcome Message" to be displayed when SM is initialized.
Set Defaults: returns the display to factory settings
IMPORTANT: The settings on this tab are valid only when Station Master is connected to microHAM Router. In
order to function in stand alone mode, the settings must be saved to Station Master as power-up defaults
using "Device | Store as Power-Up Settings."
microHAM © 2016 All rights reserved

DISPLAY TAB

46