Menu: Device - microHAM STATION MASTER Manual

Router can control several devices. This allows configuring the settings for all (interfaces) connected to the
computer at the same time using the Presets.
Each device has its own tab (page) in the main Router
notebook. The content of each device tab depends on the
type of device. Adding a device is automatic when Router
detects a new device. Once detected, a device remains in
Router even though device is disconnected. Each device is
identified by a unique serial string.
Rename – Creates a custom device name. This is useful if
two or more devices are connected to the Router. For
example CW KEYER, micro Keyer and USB Interface II
can be renamed to more identifiable names as shown
here...
Delete - Removes a device from the Router. Only devices
that have been disconnected (those with a RED "X" on device
tab) can be removed. To disconnect a device from Router,
unplug the USB cable.
Save Template - will save the current Router settings to template file.
When clicked, Router will open a standard File Save dialog window – the default location is
C:\Documents and Settings\All Users\Application Data\microHAM\cfg. If a hypertext (html) or plain text
(txt) documentation file of the same name as the template is present in the same directory, it will be
associated with the template.
Load Template – will automatically configure Router from a template (*.tpl file).
When clicked, Router will open a standard File dialog – the default location is: C:\Documents and Settings\All
Users\Application Data\microHAM\cfg - and the desired template can be chosen. When Router loads a
template, it looks for an html or txt file with the same name as the template in the same directory. If such
file is found, it is displayed.
TIP: Templates are a powerful tool for quickly configuring Router to work with a particular application.
Template files are interchangeable between computers and ideal for cloning setups in multi-computer
stations or for sharing configurations between users.
Store as Power-Up Settings: - will store the current settings of the Keyboard, Display and System tabs to the
Station Master's EEPROM. If Station Master is operated without connection to the computer it will use
the settings stored in EEPROM. If Station Master is connected to a computer running Router, the power-
up settings will be overridden by the Router settings but the default settings are retained in EEPROM.
Upload Firmware: microHAM will occasionally release updates to the firmware in Station Master. The update
may support new features in Router or improve application compatibility. The most recent public version
of the firmware is always available from
To update firmware, download the firmware file to your computer, then click on Device | Upload Firmware. A
Windows file dialog will open, navigate to the directory into which you downloaded the firmware file and
select the file.
microHAM © 2016 All rights reserved
DEVICE MENU
www.microham.com/contents/en-us/d29.html
17