Menu: Help; Device Configuration Tabs - microHAM micro2R u2R User Manual

Manuals: Link to microHAM manuals located on your system
Setup Guides: Link to software configuration guides for many common applications.
Cable Schematics: Link to cable diagrams.
Download Documents: Downloads microHAM documentation including updated manuals and setup
guides. You may specify the products for which you want documentation. This requires an Internet
connection.
microHAM Home Page: Link to
microHAM Downloads Page: Link to
Show Tooltips: When checked, small, single line help is displayed below the mouse cursor
Update Router: Download and install the most recent version of Router.
About: Shows the Router's internal version number
Change logs: Shows the Router and firmware changes.
There are ten (10) tabs for configuring micro2R. Each tab controls part of micro2R's functions. Except for
CW Messages, FSK Messages and Functions tabs, any change is applied immediately to micro2R.
Ports: assign virtual ports to the micro2R for use by applications
●
Audio: configures headphone switching based on operator preference, receive focus and transmit
●
source.
Audio Mixer: sets sound card levels.
●
NOTE: The Audio Mixer is not available under Vista or Windows 7. Those operating systems do not
permit an application like Router overall control of the sound device.
PTT & ACC: configures T/R keying and foot switch functions
●
CW/WinKey: configures the internal CW keyer
●
CW Messages: enter/store internal CW message memories
●
FSK Messages: enter/store internal FSK message memories
●
DVK: configure and control the level of Router's voice keyer
●
Keyboard: configure operation of PS/2 keyboard or keypad
●
SO2R: select source of focus control and other SO2R operating features.
●
microHAM © 2010 All rights reserved
HELP MENU
www.microHAM.com
www.microham.com/contents/en-us/d29.html

DEVICE CONFIGURATION TABS

19