Features And Functions - microHAM STATION MASTER Manual

General:
Programmable Antenna, BPF, Rotor and PA controller
•
Twenty (20) programmable relay outputs
•
Integrated level converter for transceiver computer control port
•
Decodes all frequencies of connected transceiver, including 75m, 6m, VHF and UHF
•
Unlimited number of custom defined frequency segments "bands"
•
Single USB connection to computer
•
Stand alone operation
•
Internal Rotator control
•
Virtual Rotators function
•
Separate RX/TX antenna support
•
Automatic Antenna Scan function
•
Separately programmable up to 20 outputs sequencer
•
Automatic power amplifier support
•
Fully compatible and simple integration with microHAM "keyers" (microKEYER, DigiKEYER, CW Keyer,
•
microKEYER II, and MK2R).
Proprietary SteppIR support with automatic tuning and protection
•
Hot Switch protection with user defined timing
•
TX Inhibit support for Yaesu, TenTec and Elecraft K3 transceivers
•
Receive only antenna support
•
Optical isolation from computer
•
PS/2 keyboard or keypad with dual control of Station Master and microHAM "keyer"
•
Integrated chokes and filters for maximum RFI resistance
•
Metal/Aluminum case, powder coated and silk screened
•
Free, no time limit firmware/software upgrades via Internet
•
Radio control:
Integrated level converter for CI-V, FIF-232, IF-232, or RS-232
•
Up to 57600 Baud with fake handshake support
•
Supports most Elecraft, Icom, Kenwood, TenTec, Yaesu and other radios
•
Antenna Control (Port A):
Ten (10) programmable relay outputs
•
Configurable common
•
ground
•
13.8V positive
•
external power, max. + 24V
•
Programmable break-before-make delay
•
Compatible with all remote antenna switches using common ground or positive control
•
Additional Antennas or BPF Control (Port B):
Six (6) programmable relay outputs
•
Configurable common
•
ground
•
13.8V positive
•
external power max. + 24V
•
Compatible with all automatic BPF on the market
•
RX Antennas and TX Sequencer (Port B):
Four (4) programmable relay outputs
•
Both poles of relay contact available
•
Independent settings of Lead and Tail delay for each sequencer output
•
microHAM © 2016 All rights reserved

1 - FEATURES AND FUNCTIONS

3