Antenna Switching & Ptt Sequencer: Bands - microHAM STATION MASTER Manual

The Bands tab is used to select available antennas, bandpass filters, PA On, and Sequencer outputs by
frequency.
NOTE: On this tab, band does not refer to a specific amateur radio band (ie. 20m, 15m), but a range of
frequencies (e.g., 3,500 to 3,600 KHz). The minimum (starting) frequency is included in the "band" but
the maximum (ending) frequency is not. For a band 3,500 – 3,600 KHz, the lowest frequency in the
band is 3,500,000 Hz and the highest frequency is 3,599,999 Hz.
There is no limit to the number of bands that can be defined but the bands can not overlap. New bands can be
created using the Add button and existing bands can be deleted by selecting the desired band (orange
background) and clicking the Remove button.
The minimum and maximum frequencies of previously defined bands can be edited by double clicking on the
frequency field. Bands are automatically sorted by ascending frequency.
When new band is added, Router automatically adds first antenna from the Antennas list as an Antenna
Selection for this band. Antennas can be added or removed by selecting the antenna line (blue background)
inside the band and clicking the Add/Remove button. The antenna order can be changed with Up/Down buttons.
microHAM © 2016 All rights reserved
BANDS
37