Menu: Preset - microHAM STATION MASTER Manual

For easy switching among applications, Router supports up to 12 user
definable Presets. Different configurations can be stored in these
presets and recalled almost instantly simply by clicking on the preset
button.
Each preset contains the settings for all devices connected to, and
controlled by, Router. For example, if Router controls a Station Master,
microKEYER II, and a USB Interface II, each preset remembers the
settings for ALL devices including the assignment of COM ports and
the contents of all sub-tabs except the FSK and CW Messages tabs.
NOTE: Presets for various loggers and Station Master are not available
until they have been saved by the user using Preset | Save as.
For setup instructions for various loggers refer to Setup Guide
documents available in Router Help menu (Use Help |
Download Documents first if Help | Setup Guides are not
available or incomplete).
There are three ways to apply a preset once it is created:
1. Click on Preset and select it from the pull-down menu.
2. Click on a preset button. To have buttons visible in Router,
Preset | Show Buttons must be checked. When the
settings from a preset are applied, a green light located in
the preset button is lit. This green light is on ONLY when all settings in Router are same as those
stored in the preset.
3. By right clicking on the system tray icon when the Router is minimized.
The presets and the current router configuration are stored to the registry when
Router is closed and recalled when Router is loaded.
Save as - Saves the current Router settings to a preset for future use.
Rename - Allows renaming of an existing preset.
Delete - Delete chosen preset.
Show buttons - When checked, Router shows the preset buttons.
microHAM © 2016 All rights reserved
PRESET MENU
16