microHAM STATION MASTER Manual page 58

microHAM © 2016 All rights reserved
Bands tab
Once the antenna and sequencer configurations have been established, the frequency relationships can be
defined. This is done by creating several bands, primarily based on the operating bandwidth of the antennas.
160 Meters:
The frequency range is 1.820-2.000 MHz with four antennas selections: the vertical for transmit, the receive
4SQ, the previously defined 160m group and the 80m dipole as an "extra" receive only antenna. The PA BCD
code is set to 1 even though it is not required. Remote PA and KEYOUT are enabled, the 160 M BPF is
selected (B1) and the sequencer output is enabled for the 4SQ preamplifier.
58