Huawei iBAT 2.0-CIM01C2 User Manual page 60

iBAT 2.0-CIM01C2
User Manual
Figure 7-6 Schematic diagram
Replacing iBATs in Batches
Figure 7-7 Replacing iBATs in batches
Start No.: Indicates the start reference number corresponding to the operation type
Batch-replace iBAT. End No.: Indicates the end reference number corresponding to the
operation type Batch-replace iBAT.
Example: There are six iBATs in the network and they are numbered 1, 2, 3, 4, 5, and 6.
Choose Batch-replace iBAT, set Start No. to 2, and set End No. to 5. After the operation, the
network parameters of the number 2–5 iBATs are cleared, and numbers 2–5 are reserved.
Figure 7-8 Schematic diagram
Issue 07 (2019-01-02) Copyright © Huawei Technologies Co., Ltd.
7 iBAT Networking Configuration
54