Bim - Huawei iBAT 2.0-CIM01C2 User Manual

iBAT 2.0-CIM01C2
User Manual
Networking Switch
Table 2-11 Networking switch description
Name
Button pressing
Button pressing
Button holding down
Default Button
Table 2-12 Default button description
Name
Default button

2.2 BIM

The BIM (BIM01C3) is a battery monitoring module that supports 12 V power input and
monitors the voltages, internal resistances, and pole temperatures of batteries.
The BIM (BIM02C1) is a battery monitoring module that supports 2 V power input and
monitors the voltages, internal resistances, and pole temperatures of batteries.
Features



Issue 07 (2019-01-02)
 Blinking intermittently at super short intervals means an indicator blinks at super short intervals for
0.5s and then remains off for 0.5s.
Definition
Press the button for
less than 1s.
Press and hold the
button for more than
1s but less than 5s.
Press and hold the
button for more than
10s but less than 20s.
Definition
Press and hold the
button for more than
10s but less than 20s.
Monitors the voltages, internal resistances, and pole temperatures of batteries.
Uploads battery data to CIM through wireless communication.
Has the hibernation function:
Copyright © Huawei Technologies Co., Ltd.
Function
CIM blinking function
Creates a network if no network has
been created. Switches between network
organization and data transmission if a
network has been created.
Clears the current network (including
the network parameters of all the online
BIMs).
Function
Reset to the default IP address
(192.168.0.10).
2 Overview
14