NEC UNIVERGE SV8300 Command Manual page 744

COMMAND CODE TITLE:
EC
System Data Copy
Y
No. MEANING
8 System data copy
from the Main unit
to Remote units
NOTE 10: You can assign only "0" to the second data. "1" is displayed as the second data while the
system data being copied.
NOTE 11: When Secondary unit is normal mode in Failover system, all system data of Primary unit
can be copied to Secondary unit by this command.
Day Mode/Night Mode Apply
Y
No. MEANING
9 Applying Day
Mode/Night Mode
to all Multiline Ter-
minals
NOTE 12: This data is effective only when the second data is set to 0.
NOTE 13: This command is executed after CM08>577 is set, or when the station tenant number of My
Line is changed by CM12 Y=04.
MAINTENANCE BY PCPro/CAT
1ST DATA
DATA MEANING
00 All Remote units
02 Remote unit No. 02
50 Remote unit No. 50
1ST DATA
DATA MEANING
0 Day Mode/Night
Mode applying
2ND DATA
DATA
0
1
3
2ND DATA
DATA
0
1
3
3-688
RELATED
COMMAND
MEANING
Start to copy system CM43 Y=7
data
Now copying/Sys-
tem data copy state
can be read
Stand by/System
data copy state can
be read
NOTE 10
NOTE 11
RELATED
COMMAND
MEANING
Start to apply CM08>577
Now applying CM12 Y=04
Stand by
NOTE 12
NOTE 13
NWA-033623-001 Rev.8.1
CMEC
: Default
: Default
91ch3008.fm
JUNE/15/2011