NEC UNIVERGE SV8300 Command Manual page 132

Hide thumbs Also See for UNIVERGE SV8300:
Table of Contents

Advertisement

COMMAND CODE TITLE:
08
846
Setting CAMP ON to the destination when Call Forwarding-All
Calls is set by SCF FID=19
847
Send OAI SMFN when setting CAMP ON of OAI SMFN
FID=6 STS (status)=3 for the Call Hold status
848
Whether to send SMDR output of abandoned incoming call
when an internal call is terminated from a trunk and the station/
trunk is busy
849
Send virtual station number (CM11) to SMDR when the call to
the virtual station is transferred by Call Forwarding-All Calls/
Busy Line/No Answer-Outside
NOTE:
When the second data of CM08>849 is set to 1, originating station number/incoming trunk number is
sent to SMDR.
850
Operation for Wake Up Call setting over the limitation assigned
by CM42>181
NOTE:
If one minute ahead also exceeds the limitation on the number of Wake Up Call, it is set to one more
minute ahead. If the attempt cannot be set up to 10 minutes.
851
Send OAI SMFN STS (status) 3-9/3-10 when a call in OAI
queuing is ACD/UCD
852
Whether to send SMDR output of abandoned outgoing call
854
Send MIS command while hearing busy tone on ACD termina-
tion
856
Setting of a line feed code for external printer
857
Printing the record of Automatic Wake Up for an individual sta-
tion set/cancel from a Front console/Hotel console/DSS con-
sole/PMS/Attendant console
859
Printing the record of Automatic Wake Up for an individual sta-
tion execution
BASIC SERVICES
BASIC SERVICE
0
To set
1
Not set
0
To send
1
Not sent
0
To send
1
Not sent
0
To send
1
Not sent
0
Set it to one minute ahead
1
Restricted
0
To send
1
Not sent
0
To send
1
Not sent
0
To send
1
Not sent
0
CR
1
CR/LF
0
Not available
1
Available
0
Not available
1
Available
3-76
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JANUARY/31/2012
CM08

Advertisement

Table of Contents
loading

Table of Contents