NEC UNIVERGE SV8300 Command Manual page 186

COMMAND CODE TITLE:
0C
Y
No. MEANING
11 Information of
Remote System
Upgrade
UPDATING OF IP STATION FIRMWARE/REMOTE SYSTEM
UPGRADE
1ST DATA
DATA MEANING
XX01 Port number for
FTP server
XX: Unit No.
(01-50)
NOTE:
Port No. 21 is used for the file transfer (control), and Port No. 20 is used for the
file transfer in default setting.
For example, when the second data is set to 3000, Port No. 3000 is used for the file
transfer (control), and Port No. 2999 is used for the file transfer.
XX02 User ID for FTP
server
XX: Unit No.
(01-50)
NOTE: When no user ID is assigned, log into the FTP server with "anonymous".
XX03 Password for FTP
server
XX: Unit No.
(01-50)
NOTE: While entering the password with CAT "*" (asterisk) is displayed on LCD. When
entering the password with the MOC screen, actual data is displayed.
XX04 Directory name
XX: Unit No.
(01-50)
NOTE:
If the CPU program is in the root directory of the FTP server, the directory name
setting by this data is not required. In this case, the root directory name of the FTP
server can be obtained automatically.
DATA
00001
65534
CCC
NONE
X
XXXXXXXX
CCC
NONE
X
XXXXXXXX
CCC
NONE
XXX...X
CCC
NONE
3-130
2ND DATA
MEANING
TCP Port No. for the FTP server
Clear
TCP Port No. 21
User ID (Maximum 8 characters)
X: A-Z, 0-9
Clear
No data
Password (Maximum 8 characters)
X: A-Z, 0-9
Clear
No data
Directory name
(Maximum 32 characters)
Clear
No data
Continued on next page
NWA-033623-001 Rev.8.1
CM0C
: Default
91ch3001.fm
JUNE/15/2011