System Data Backup - NEC UNIVERGE SV8300 Command Manual

SYSTEM DATA BACKUP

• If you operate as follows without system data backup after system data setting or service
memory setting (registration of the features such as "Call Forwarding" and "Speed Dialing"
from a station), the data that has been set is invalid.
You must execute the system data backup before the following operations.
-Turning Off the system
-System Reset (reset of CPU blade)
-Changing the CPU blade to Off-Line Mode
-Changing the CPU blade to On-Line Mode after system data setting under Off-Line Mode
• You can execute the system data backup by the following two ways.
-Executing the system data backup once a day at the time set by CM43 Y=5>00
(If no data is set, the default setting is 3:00 a.m.)
-Executing the system data backup from PCPro/CAT by CMEC Y=6>0: 0
• Do not reset the CPU blade while "SYSD" LED on the CPU blade is flashing.
CAUTION
2-12
Chapter 2 PRECAUTION
SYSTEM DATA BACKUP
NWA-033623-001 Rev.8.1
91ch2001.fm