NEC UNIVERGE SV8300 Command Manual page 131

Hide thumbs Also See for UNIVERGE SV8300:
Table of Contents

Advertisement

COMMAND CODE TITLE:
08
830
Kind of Center Office for Centralized Billing-CCIS
NOTE 1:
Set this data to the Local Office of the Centralized Billing-CCIS. This data setting is not required for
Center Office.
NOTE 2:
This data is available in NEAX 2400 IMS Extended Format. (Related Command: CM04 Y=01>07)
833
Whether to send SMDR output of abandoned incoming call
when no answer is received
835
Printing of each hotel feature record with the printer
836
System clock used for the SMDR output of outgoing/incoming
call
837
System clock used for the SMDR output of station-to-station
call
838
Tenant No. of built-in SMDR output
[8300R3]
839
Sending of OAI SMFN with intermediate information via OAI
queue
840
Send OAI SMFN when setting CAMP ON of OAI SMFN
FID=1 STS (status)=8 and when answering by pressing Answer
Key from the set PBX of OAI SMFN FID=2 STS (status)=8
841
Advice of Charge (AOC) information is sent to PMS
[Australia/France/Germany/Netherlands/Italy/Greece/
Luxembourg/Portugal/Spain/Sweden]
NOTE 1:
To send AOC to PMS, set the data as follows.
CM08>841: 0, CM08>404: 1, CM42>69, 70
NOTE 2:
To send call unit to PMS, set the data as follows.
CM08>841: 1, CM08>404: 1
BASIC SERVICES
BASIC SERVICE
0
SV8300
1
2400 IPX
0
Not sent
1
To send
0
To allow
1
Not allowed
0
System clock of unit that the seized
trunk is accommodated (for outgoing
call)/System clock of unit that the ter-
minated trunk is accommodated (for
outgoing call)
1
System clock of Main Unit
0
System clock of the unit that the
seized trunk/calling station is accom-
modated
1
System clock of Main Unit
0
Tenant No. 01 fixed
1
Tenant No. of CM12 Y=04/CM30
Y=01
0
To send
1
Not sent
0
To send
1
Not sent
0
To send (dollar/euro charge)
1
Not sent (call unit)
3-75
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JANUARY/14/2011
CM08

Advertisement

Table of Contents
loading

Table of Contents