NEC UNIVERGE SV8300 Command Manual page 251

COMMAND CODE TITLE:
15
Service Restriction Class A
No.
228 32-Party Conference Connection by Call Transfer
[8300R5]
NOTE: This data is effective for the station of Call Transfer operator from own office. The station of Conference
participants from the different offices via CCIS/IP trunk (P2P CCIS) is allowed to participate in Confer-
ence regardless of this data.
229 RTP route for station-to-station connection using Standard
SIP station
[8300R5]
NOTE 1: To establish Peer-to-Peer connection of station-to-station calling with Standard SIP station, set this
data to "0" for both Standard SIP station.
NOTE 2: When using access codes assigned by CM20 Y=0-3: A263/A264, whether to use Peer-to-Peer connec-
tion or not depends on access codes regardless of this data.
NOTE 3: A reset of the terminal is required after this data setting.
400 Displaying pattern of Caller ID on the LCD of Multiline Ter-
minal before answering or after answering a trunk call
NOTE 1:
Set this data to "0" or "1" when calling number and calling name is displayed at the same time.
NOTE 2: When the second data of CM15 Y=400 is set to 0, set the second data of CM15 Y=136 to 1 (Calling
Name Display).
NOTE 3: When the second data of CM15 Y=400 is set to 1, set the second data of CM15 Y=136 to 0 (Calling
Number Display).
SERVICE RESTRICTION CLASS A
Y
MEANING
SERVICE
REST.
CLASS (A)
00
15
00
15
00
15
3-195
: Default
SETTING DATA
DATA MEANING
0 Restricted
1 Allow
0 Peer-to-Peer connec-
tion
1 Via VoIPDB
0 To display calling
number on upper line
of LCD, calling name
on middle line of LCD
1 To display calling
name on upper line of
LCD, calling number
on middle line of LCD
7 Not displayed calling
number and calling
name simultaneously
Continued on next page
NWA-033623-001 Rev.8.1
91ch3002.fm
JANUARY/31/2012
CM15