NEC UNIVERGE SV8300 Command Manual page 240

COMMAND CODE TITLE:
13
No.
61 Storage of the call history (IC) when han-
dling of unanswered a trunk call
63 Accommodation of D
ADP
NOTE 1: Set this data only for a Base Port of DLC blade.
NOTE 2: Whether the following equipment can be accommodated to the same DLC blade or not depends on
this data.
- When the second data is set to "0"
Accommodatable
Unaccommodatable: D
- When the second data is set to "1"
Accommodatable
Unaccommodatable: D
64 Whether the station is for the outgoing
call of Conference
[8300R2]
66 Reverse Contrast on the LCD for Univer-
sal Design
[8300R2]
NOTE 1: This data is effective only when DT330/DT710/DT730 are used.
NOTE 2:
This data setting is valid by resetting DT300/700 Series when using 8300R2 software.
67 Accommodation of DTH-4R/DTL-8R
[North America Only]
68 The DTMF signal is transmitted from
term
DT700 to D
term
number of D
NOTE: This data is used when IP Multiline Terminal or BCT (IVR) is connected to the system. This data is
assigned to the station number of IP Multiline Terminal/BCT (IVR).
STATION CLASS-2
Y
MEANING
term
70/PGD(2)-U10
BLADE RESET
: DT300/D
term
75/DESKCON/DSS Console
: DT300/D
term
70/PGD(2)-U10 ADP
IP (Set it to the station
IP)
SETTING DATA
DATA
0 To store
1 Not stored
0 To accommodate
1 Not accommodated
term term
85/D 70/PGD(2)-U10 ADP
term term
85/D 75/DESKCON/DSS Console
0 Station for the outgoing call
1 Ordinary station
0 Background: Black, Letters: White
1 Background: White, Letters: Black
0 To accommodate
1 Not accommodated
0 To send
1 Not sent
3-184
: Default
MEANING
Continued on next page
NWA-033623-001 Rev.8.1
91ch3002.fm
JUNE/15/2011
CM13