NEC UNIVERGE SV8300 Command Manual page 249

COMMAND CODE TITLE:
15
Service Restriction Class A
No.
205 Selection of Off Hook Ring Volume
NOTE: The following operations are required when this data is changed.
Multiline Terminal : Disconnect the Multiline Terminal cable and connect the Multiline Terminal cable
IP Station
207 Indication when a station is set to the Line Key of Multiline
Terminal (DESI-less)
210 Display my line number on the Multiline Terminal
211 Malicious Call Trace
[Australia Only]
212 Preset Dialing on Multiline Terminal
NOTE: If this data is set to "1" when using 8300R2 software or later, Preset Dialing on Multiline Terminal is
active regardless of the setting of CM12 Y=22.
213 SMDR service for station to station call
214 Caller ID Display on each Multiline Terminal
215 Blinking LCD for caller ID Display on each Multiline Termi-
nal
216 Mobility Access Mode
217 ISDN Alternative Routing in Remote Unit survival mode
SERVICE RESTRICTION CLASS A
Y
MEANING
again/Unplug the DLC blade and plug the DLC blade again.
: Logout the IP Station and login the IP Station again.
SERVICE
REST.
CLASS (A)
00
15
00
15
00
15
3-193
: Default
SETTING DATA
DATA MEANING
0 Off Hook Ring
Volume 2
(As per CM42>75)
1 Off Hook Ring
Volume 1
(As per CM42>74)
0 Station Number
1 Station Name
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Allow
1 Restricted
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Allow
1 Restricted
Continued on next page
NWA-033623-001 Rev.8.1
91ch3002.fm
APRIL/16/2010
CM15