NEC UNIVERGE SV8300 Command Manual page 100

COMMAND CODE TITLE:
08
180 Ringing cadence on Automated Attendant call, DID call and
DISA call
[Other than North America]
Ringing cadence on Automated Attendant call, DID call and
DISA call
[North America Only]
181 Multiline Terminal/DSS Console One-Touch key calling while
another party being rung, or while talking with another party
185 When the transferring station goes on-hook before the called
station answers for Call Transfer-All Calls service, if the trans-
ferred call remains unanswered for a preprogrammed duration,
the transferring station is recalled.
187 Recall priority over Call Forwarding
193 Sender prepause for C.O. outgoing call
(Not used with LCR)
194 Sender prepause for Tie Line outgoing call
199 Line Preselection on a Multiline Terminal
Off-hook/Speaker key is required after pressing the desired
Line/Trunk key.
NOTE:
When pressing the Line/Trunk key while terminated a call, Caller ID can be confirmed on the LCD with-
out answering the call.
BASIC SERVICES
BASIC SERVICE
Recall timing: See
0 Special Ringing for Multiline Termi-
nal
As per CM04 Y=00>06 for Single
Line Telephone
1 As per CM35 Y=033 or CM76 Y=22
0 Special Ringing for Multiline Termi-
nal
0.25 seconds ON-0.125 seconds OFF
-0.25 seconds ON-0.125 seconds OFF
-0.25 seconds ON-2 seconds OFF
As per CM04 Y=00>06 for Single
Line Telephone
1 As per CM35 Y=033 or CM76 Y=22
0 Not available
1 Available
0 Not available
1 Available
CM41 Y=0>07
0 Recall is higher
1 Call Forward is higher
0 To provide
1 Not provided
0 To provide
1 Not provided
0 Not required
1 Required
3-44
: Default
SETTING DATA
See CM08>397
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JUNE/15/2011
CM08