NEC UNIVERGE SV8300 Command Manual page 143

COMMAND CODE TITLE:
08
BASIC SERVICE: 1800-1872
1800 Printout by Direct Data Entry
[8300R3]
1801 Printing format of Direct Data Entry
[8300R3]
1817 Whether to send Check Out Outgoing Call Report (FTC=16,
FC=C) to PMS when guest station is engaged in an outgoing
call at check out
[8300R3]
1818 Whether to send Check Out Message Waiting ON/OFF Report
(FTC=16, FC=5/6)
[8300R3]
1819 Selection of message for Station Message Detail to be sent to
PMS
[8300R3]
1820 Selection of message for Message Waiting Lamp ON/OFF
changed by PBX to be sent to PMS
[8300R3]
1821 Provide parity LRC to transmission for PMS (Attach BCC to
messages)
[8300R3]
1856 Ringing on Suite Room station
[8300R5]
NOTE: Sub station can be received an incoming call when this data is set to "0".
1861 Setting of Room Cut Off when Room Status in recovery room
data notification (FTC=57, FC=1) is between 3 and 9
[8300R5]
NOTE: This data is effective only when CM04 Y=01>10 is set to "0".
1864 DSS console key for switching Check Out
[8300R5]
NOTE: This data is effective only when CM04 Y=01>10 is set to "0".
BASIC SERVICES
BASIC SERVICE
0 Available
1 Not available
0 Format2
1 Format1
0 Not sent
1 To send
0 To send
1 Not sent
0 FTC=14, FC=2
1 FTC=54, FC=1
0 FTC=13, FC=3/4
1 FTC=53, FC=2
0 Not provided
1 To provide
0 Ring master station only
1 Ring all stations
0 To set
1 Not set
0 Available
1 Not available
3-87
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JANUARY/31/2012
CM08