NEC UNIVERGE SV8300 Command Manual page 361

COMMAND CODE TITLE:
35
Y
No. MEANING
145 Calling party information
transfer to ISDN on tandem
call from CCIS/SIP
Calling party information
transfer to Enhanced 911/
MFC Signaling on DOD
route on tandem call from
CCIS
147 Kind of Call Forwarding-No
Answer key assigned to
DESKCON
148 System operation when the
station, after holding the
other trunk (TRUNK-A), has
made a switch hook flash
while talking with another
trunk (TRUNK-B)
150 Storage of the call history
(IC) when answering a trunk
call/handling of unanswered
a trunk call
155 Calling party number is used
as the ID Code for Remote
Access to System (DISA)
156 Calling Name Display for
incoming call from ISDN/
T1-ANI/MFC-R2 route
NOTE: Calling Name is displayed when this command is set to "0" or "1" and CM13 Y=69 is set to "0" if a
call from sub line is income.
TRUNK ROUTE DATA
DATA
0 To provide
1 Not provided
0 To provide
1 Not provided
0 Call Forwarding-No Answer key assigned by
CM90 Y=00: F6068
1 Call Forwarding-No Answer key assigned by
CM90 Y=00: F6063
0 Broker
TRUNK-B is held, and station returns to the
connection with TRUNK-A.
1 Three-way Calling
0 To store
1 Not stored
0 Available
1 Not available
NOTE:
0 1000-Slot Memory Block No. 03
1 1000-Slot Memory Block No. 02, 03
2 1000-Slot Memory Block No. 00-09
3 Not provided
SETTING DATA
MEANING
'
s Call
Assign this data only for Ring down
connection.
3-305
: Default
RELATED
COMMAND
CM90
CM08>103, 104
CM12 Y=38
CM2A Y=15, A0
CM15 Y=136
[8300R5]
Continued on next page
NWA-033623-001 Rev.8.1
91ch3003.fm
JANUARY/31/2012
CM35