NEC UNIVERGE SV8300 Command Manual page 31

To clear the CAT mode:
• For DT300/DT700 Series/D
1. Press EXIT key while "COMMAND= –" is displayed on the LCD.
or
1. Lift handset (Off Hook)
– Speaker lamp off.
2. Replace handset (On Hook)
– Conf, Answer lamps off.
– LCD returns to clock.
term term
70 (Elite)/D 75 (Series E)/D
1-17
Chapter 1 HOW TO USE CAT
CAT MODE SETTING PROCEDURE
term
85 (Series i)
NWA-033623-001 Rev.8.1
91ch1001.fm
JANUARY/14/2011