NEC UNIVERGE SV8300 Command Manual page 226

COMMAND CODE TITLE:
12
Y
No. MEANING
24 Kind of Multiline Terminal
NOTE 1: Refer to PRECAUTION (3) for the combination of Line/Trunk/Feature Keys and One Touch Keys of the
Multiline Terminals.
NOTE 2: The default data of this command is "0" (B mode) when the station number is assigned by CM10.
NOTE 3: After the 2nd data of CM12 Y=24 is changed, pull out and reconnect the modular connector of the Mul-
tiline Terminal.
25 Type of Voice Mail System
(VMS)
NOTE: Effective only
when CM08>443:
0.
26 Specification of Voice Mail
Live Monitoring mode
29 Send indication data to
Line Key LCD of Multiline
Terminal (DESI-less)
Request my line number to
the Multiline Terminal
NOTE: When second data is inputted, my line number information is transmitted to Multiline Terminal according
to setting of CM15 Y=210.
Second data returns to 1 after the completion of transmitting my line number information.
30 Sending BLF message via
CCIS to Destination No.0
31 Sending BLF message via
CCIS to Destination No.1
32 Sending BLF message via
CCIS to Destination No.2
33 Sending BLF message via
CCIS to Destination No.3
STATION CLASS-1
DATA
0 B mode
7 A mode
see PRECAUTION (3)
0 VMS with DTMF signaling
3 VMS with MCI
0 Available (Automatic mode)
1 Available (Manual mode)
3 Not available
0 To send indication data
1 Data sending completed/Not sent
0 Available
1 Not available
0 To send
1 Not sent
0 To send
1 Not sent
0 To send
1 Not sent
0 To send
1 Not sent
SETTING DATA
MEANING
3-170
CM12
: Default
RELATED
COMMAND
CM94
CM08>443
CM15 Y=485
CM9C
CM15 Y=210
CM50 Y=08>0
CM50 Y=08>1
CM50 Y=08>2
CM50 Y=08>3
Continued on next page
NWA-033623-001 Rev.8.1
91ch3002.fm
APRIL/16/2010