NEC UNIVERGE SV8300 Command Manual page 137

COMMAND CODE TITLE:
08
1012 Display Caller ID to my line same as sub line when Automatic
Caller ID to sub line by CM15 Y=224/225 is available
[8300R5]
1014 Select the function to override by preset Station dialing/Pro-
grammable key on a Multiline terminal
[8300R5]
NOTE:
Preset Station dialing/Programmable key means that the station number is dialed after setting Do Not
Disturb-Override/Call Forwarding-All calls override by Access code/Programmable key.
1017 Select the function to call for Mobility Access station (Dual
Ringing ON) when Mobility Access station or Mobile Phone is
busy
[8300R5]
1019 Displaying Icon on the LCD of DT330/DT710 (DESI-less
only)/DT730/DT750
[8300R5]
1023 Whether to provide Continuous Live Record when Call Hold or
Call Transfer is operated during recording
[8300R6]
1026 Selection of Mobility Access mode
[8300R6]
NOTE: When using station service from mobile phone or Enblock Dialing Method (for Forced On PBX), set
this data to 0 (Station base).
1028 Operation for when a mobile phone does a hooking from con-
sultation hold
[8300R7]
1029 Operation for when call back to Mobility Access station
[8300R7]
BASIC SERVICES
BASIC SERVICE
0 Not available
1 Available
0 Do Not Disturb (DND), Call For-
warding-All Calls
1 Do Not Disturb (DND)
0 Calling an idle station
1 Hearing Busy Tone
0 Not displayed
1 To display
0 To provide
1 Not provided
0 Station Base (8300R6 or later)
1 Trunk Base (8300R5 or before)
0 Three Party Conference
1 Broker's Call
0 Mobility Access station and mobile
phone
1 Mobility Access station
3-81
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JANUARY/31/2012
CM08