Night Service Password; Restoring Default Settings - Siemens HiPath 1100 Programming Manual

General Programming
Step by Step
108

Night Service Password

Independently from the system password, an additional
password can be defined for activating/deactivating dif-
ferent features (e.g., Night Service, relays). The default
password is "31994." This password can be changed.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 4 9
Enter a new system password (5 digits).
Initial state for Programming Mode.

Restoring Default Settings

You can delete the settings that have been configured
and restore the default settings. Only "Country/Group of
Countries" settings (Code 65) will be saved as last con-
figured.
Required: Programming Mode must be active (*95
31994).
1 9 9 Enter the code for programming.
Enter the system password (default is 31994).
The system restarts.