Call Charge Value By Extension; Call Cost Limit For An Extension - Siemens HiPath 1100 Programming Manual

Step by Step
*

Call Charge Value by Extension

This setting specifies the monthly amount that each ex-
tension can spend.
The default value is the "0" comma slot and the "00001"
factor.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 9 7
Enter the extension number (e.g. 11/101).
Enter the maximum amount that can be spent by the
extension (up to 9 digits)
Enter the decimal separator position (0 to 3)
Examples:
– for US$ 0.12: 000000012 and 2 (comma position)
– for US$ 2.00: 00002 and 0 (comma position)
– For example, for $ 123456.789: 123456789 and 3
Initial state for Programming Mode.

Call Cost Limit for an Extension

This setting limits how much an extension has available
for Call Charges.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 4 4
Enter the extension number (e.g. 11/101).
or
Activate/Deactivate Call Charge limit:
#
= To activate
*
= To deactivate (default)
#
Initial state for Programming Mode.
(comma position)
General Programming
103