Remote Administration; Service Call; Remote Software Update; Remote Operation Mode - Siemens HiPath 1100 Programming Manual

General Programming
Step by Step
112

Remote Administration

Service Call

This feature allows you to call a service center and let
administration be carried out remotely, through the call
established.
9 9 4 Enter this code.
*
Enter the number of technical support.
# Press to confirm.
Wait for a confirmation tone.

Remote Software Update

If authorized, the software can be update remotely.
9 4 1 5 Enter this code.
*
Wait for a confirmation tone.
The software is sent by the service center.

Remote Operation Mode

This specifies the remote updating of the software. The
update can be carried out remotely over digital ISDN
lines and analog lines connected to a modem.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 8 4
1 or 2 Select the operating mode:
1
2
Initial state for Programming Mode.
= Via ISDN (default)
= Via modem