Symmetric/Asymmetric Call; Absence Of Ack Setup For A S0 Line - Siemens HiPath 1100 Programming Manual

Programming a Digital Trunk
Step by Step
, ,
0 1 0 2 0 3
. , ,
0 1 0 2 0 3
140

Symmetric/Asymmetric Call

This setting configures the system for symmetric or
asymmetric calls.
Check with your local carrier to know which operating
mode should be configured for your system.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 7 4
or Enter the S
1 1
Enter the slot for the S
0 0
external line only - PP or PMP);
0 0
0 0
ule, enter Slot 11 and Port 00... 04).
or
Select the operating mode:
* #
* = Asymmetric
= Symmetric (Default)
#
Initial state for Programming Mode.
Absence of ACK Setup for a S
Check with your local carrier to know which operating
mode should be configured for your system.
Required: Programming Mode must be active (*95
31994).
0 7 5 Enter the code for programming
or Enter the S
1 1
Enter the slot for the S
0 0
external line only - PP or PMP)
0 0
[1] Module slots are: HiPath 1120 (02), HiPath 1150 (03) and HiPath
1190 (01 and 11).
[2] Module slots are: : HiPath 1120 (02), HiPath 1150 (03) and HiPath
1190 (01 and 11).
Module slot on the system
0
module slot:
0
... = On the HiPath 1120(Port 00 slot is for
0 1
... = For HiPath 1150;
0 4
... = For HiPath 1190 (for the second mod-
0 4
2
Module slot on the system.
0
module slot:
0
... = On the HiPath 1120 (Port 00 slot is for
0 1
... = For HiPath 1150;
0 4
1
.
0 Line