S2 Access; External Line Prefix - Siemens HiPath 1100 Programming Manual

Programming a Digital Trunk
Step by Step
1
148

S2 Access

It provides two communications channels (64 kbps
each) as well as a capability for sharing applications
such as video conferencing or Internet access. Some
features such as Caller ID (CLIP), Malicious Call Identi-
fication (MCID), Caller ID Blocking (CLIR) can be en-
abled if provided by your local carrier. The HiPath 1150
can be equipped with one TME1 module (configured for
up to 30 channels). The HiPath 1190 can be equipped
with two TME1 modules (one configured for up to 30
channels and the second one for up to 15 channels.
When only digital lines are available, the settings for
DID Prefix, External Number Phonebook, Country
Code, and Area Code must be configured.

External Line Prefix

This setting specifies the prefix for the PABX external
lines, for domestic and international calls. By default,
the type of a programmed called is not specified.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 8 9
or 2 Select the type of call:
= National
1
2
= International
Enter the line prefix (up to 5).
Press this key.
#
Initial state for Programming Mode.
A TME1 with S2M access operates on TEI (Termi-
nal Endpoint Identifier) non-automatic mode. TEI
value must be configured in the S2M Mainte-
nance tool.
This service is only available for Italy.