Automatic Msn Assignment Via Local Carrier; Assigning Msns To Attendants - Siemens HiPath 1100 Programming Manual

Programming a Digital Trunk
Step by Step
...
0
0 1
150
Automatic MSN Assignment via Local
Carrier
This is a subscription service enabled by a local carrier.
When this facility is enabled external line MSNs can be
automatically registered.
When the Scan button is pressed on HiPath 1100 Man-
ager (Basic -> MSN -> Settings -> Search. For more in-
formation refer to the Help file), a message is sent to
the local carrier requesting the MSN numbers. The local
carrier replies to the message received by sending the
MSN numbers which are then automatically entered
into the system.
In order for all MSN numbers to be registered in the sys-
tem, remote Seizure mode must be configured as PMP
(Point to Multipoint) an the system number must not be
in HiPath 1100 Manager (Advanced->System Settings-
>Regional Settings). If the operating mode is PP (Point
to Point) only the system number will be registered. You
must configure MSN numbers (Basic->MSN->Set-
tings). Any MSN number previously configured must be
deleted.

Assigning MSNs to Attendants

MSNs registered for each slot (see "Modem Extension
- Code 086") must be assigned to extensions, Call
Groups or a mailbox using a EVM Virtual Port (see "Mail-
boxes Assignments - Code 203") designated for an-
swering calls during a specified period of time.
An extension, a Group or a EVM Virtual Port cannot be
assigned more than once. A distinctive tone on the
handset indicates an invalid entry.
In the default configuration there are no extensions as-
signed to any slots.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 9 2
Enter the external number slot.
1 4 0
Automatic MSN Assignment facility provided by
a local carrier only works if you also subscribe to
Call Forwarding on the public network.