Night Service - Siemens Gigaset C1 User Manual

Date and Time
If there is a new appointment/anniversary in the list, the display
◆
shows
appointments/anniversaries. Once you have looked at all the new
appointments, Appoint will disappear from the display.
i
If the handset is deactivated at the time of an appointment/anniver-
◆
sary, the appointment/anniversary will be saved in the list.
If the list doesn't contain any appointments/anniversaries, you can
◆
close it with

Night service

You can set up call forwarding for each incoming MSN which forwards all incoming calls
to an external phone number, to another internal party, or with a Gigaset with inte-
grated answering machine to an answering machine. This can be done daily for a spec-
ified period of time (Start time to End time) and on weekends (Sat/Sun all day) auto-
matically. For example, when a business might normally be closed (from 6:00 p.m. to
8:00 a.m.) all calls from the office could be forwarded to a private number.
When forwarding a call externally, only the MSN which is assigned to the handset as the
incoming MSN can be forwarded from the handset.
By factory default, Night service is deactivated. To switch on Night service, first the for-
ward destination must be defined.
If external call forwarding to an external phone number is activated using
Immediately (page 117) at the time when Night service is supposed to
start, the following applies:
i
The call is forwarded to another phone number: call forwarding
◆
remains active until it is explicitly deactivated.
The call is forwarded to the same phone number: call forwarding is
◆
deactivated until the end time of Night service is reached.
The same applies when call forwarding is set up during Night service.
98
. You can also use this display key to open the list of
Appoint
.
Go Back