Automatic Update Of Date/Time; Recall For External Calls Via Isdn - Siemens HiPath 1100 Programming Manual

General Programming
Step by Step
100

Automatic Update of Date/Time

This setting allows automatic synchronization of the
system's date and time through the local carrier, during
an external call.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 3 8
or
* # Activate/Deactivate synchronization:
*
#
Initial state for Programming Mode.

Recall for external calls via ISDN

By configuring this setting, an external ISDN call can re-
quest a Recall for the MSN number called.
Required: Programming Mode must be active (*95
31994).
2 2 1 Enter the code for programming.
or To activate/deactivate Recall:
* #
* = To activate Recall (Default)
#
Initial state for Programming Mode.
= To activate (default)
= To deactivate
The settings that are automatically updated are:
Month, Day, Time and Minute. Year is not includ-
ed in the FSK message settings - it is defined as
the software's manufacturing date and can be
manually adjusted.
= To deactivate Recall
A Recall can only be scheduled under a MSN.
MSN numbers must be programmed and must
have attendants.