Door Lock; Dids For Entrance Telephones - Siemens HiPath 1100 Programming Manual

Entrance Telephone
Step by Step
120

Door Lock

This feature detects when there is a locking device in-
stalled.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 1 6
...
1 4 Enter the slot for the TFE Interface where the lock is lo-
cated (1 to 4).
or
Activate/Deactivate the Door Lock:
#
*
= To activate
*
= To deactivate (default)
#
Repeat these steps for any additional slot.
or
Press this key.
#
Initial state for Programming Mode.

DIDs for Entrance Telephones

You can specify which telephones are to answer the En-
trance Telephone calls (up to 10 extensions).
The default setting is extension 11/101.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 5 9
...
Enter the slot for the extension configured as the Door
1 4
Opener (1 to 4).
Enter the extension number (e.g. 12/102) to answer
calls from the Entrance Telephone.
Confirm the extension assigned to the Entrance Tele-
*
phone slot.
Enter the next extension number.
or
Press this key.
#
Initial state for Programming Mode.