Message For Msn; System Number; Type Of System Number - Siemens HiPath 1100 Programming Manual

EVM Module
Step by Step
...
0 0 1
Wait 5 seconds
162

Message for MSN

This setting specifies whether a message will be played
for a specific MSN.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 1 0
1 4 0 Enter the slot (001... 140) for the MSN.
or Select a Message:
1 2
1 = Message 1
= Message 2
2
Press this key.
#
Initial state for Programming Mode.

System number

This setting specifies the Produktname number to be
used when the system operates in a Point-to-Point (PP)
environment.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 1 1
Enter a number with a maximum of 10 digits (e.g., for
3415565 you can specify 341).
Wait for a confirmation tone.
Initial state for Programming Mode.

Type of system number

This setting specifies how a MSN configuration must be
sent.
Required: Programming Mode must be active (*95
31994).
2 1 2 Enter the code for programming.
... Select the type of number to be sent:
1 4
1 = Unknown (default for other countries)
= System number (default for Italy)
2