Analog Line Attendants - Siemens HiPath 1100 Programming Manual

Step by Step

Analog Line Attendants

If you want calls received over external analog lines to
ring at specified extensions at certain times of the day,
all you need to do is configure them as analog line At-
tendants.
Any extension can also be configured as a Second Atten-
dant. In this case an extension only receives a call when
the external line answering extension does not answer
the call within a specified time (
occurs, extensions configured as Second Attendants for
external lines receive the call simultaneously with the
First Attendants.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 4 2
Enter a number for an external analog line (e.g., 801).
...
Select the period of the day for answering calls:
1 4
= Day Service
1
2 = Night Service
= Second Attendant - Day
3
= Second Attendant - Night
4
Example:
801 and 802 external lines are programmed as
part of the 890 group of lines.
When using code 002, Extension 11/101 is as-
signed to Group 890. This means that when the
"0" access code is entered at this extension a
search for a free line is performed in Group 890.
For code 002, when extension 11/101 is assigned
to group 0 and the external access code "0" is di-
aled, the search for an available line is done on
group "0."
If no available line is found and the group is pro-
grammed with code 099 "Overflow for a Group
of External Lines" on page 41, the system will
search for a line in a different specified group.
Main Configurations
page 52. When this
25