Call Detail Report Manager - Siemens HiPath 1100 Programming Manual

Call Detail Report Manager

Step by Step
122
Call Detail Report Manager
Information about calls received and made are stored in
the system's memory. CDR records can be reviewed in
the following manner:
• By using a PC or printer connected through a serial
interface.
To issue a ticket list, a ticketing application such as
CallReport must be installed on the PC.
• By using a PC connected on a local network. The
ticket list can be viewed using Windows HyperTer-
minal. Configure the settings by following these
steps:
– Configure the CommSever for ADSL connection.
– Select the "Serial Printing" checkbox on the HiPath
1100 Manager, under Advanced -> System Set-
tings
– On the HyperTerminal select TCP/IP Mode and
enter the configuration number for an ADSL mod-
ule (the default is 10.0.0.1) and the port (9366)
– Do not use a Serial or ADSL connection type
while using HyperTerminal. During ticketing the
administration can be performed via USB connec-
tion, optiPoint, ISDN or analog modem.
– Tickets will only be shown after the end of the first
connection.
– For establishing a serial or ADSL connection to
the HiPath 1100 Manager disconnect HyperTermi-
nal.
It is recommended that you uncheck the "Serial
Printing" checkbox on the HiPath 1100 Manager
if tickets are not being issued over an ADSL con-
nection.
To provide accurate call details, you must update
the system's time and date information
( page 99).
The following information is recorded:
• Current date (Date)
• End of the call (Time)
• External line used (Ln)