Disa Permission; Msn Disa - Siemens HiPath 1100 Programming Manual

DISA
Step by Step
92

DISA Permission

This setting specifies an extension for using the DISA
feature.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 1 8
Enter the extension number (e.g. 11/101).
or
Activate/Deactivate a DISA permission for an extension:
* #
* = To activate
= To deactivate (default)
#
Enter the next extension number.
or
Press this key.
#
Initial state for Programming Mode.

MSN DISA

This specifies from which MSN the DISA features will
operate.
In the default configuration no MSN is set.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 1 9
Enter a MSN (up to 20 digits).
Press this key.
#
Initial state for Programming Mode.
Only one external call can be made or one fea-
ture can be used at a time.
A feature that is enabled during a call is disabled
as soon as one of the parties hangs up.
TAPI only monitors physical ports. To operate
correctly, a DISA feature must use special ports,
and those cannot be monitored. If a physical port
is used when the DISA feature is active, the TAPI
will be able to monitor it.