Call Forwarding Condicional Limitado Por Extensions - Siemens HiPath 1100 Programming Manual

Step by Step
0 1
Call Forwarding condicional limitado
por Extensions
Incoming calls can be forwarded to a specified destina-
tion list, as configured in a TAPI-type application such as
a Windows TAPI Browser. Previous list or Unconditional
Call Forwarding settings will be overwritten by the new
list settings.
The following information is needed for configuring a
list:
• Incoming Caller ID
• Day of the week and time
• Type of call (internal or external)
When more than one number have been specified for
incoming calls to an extension, the call forwarding prior-
ity will be:
1. Checks to see if the Caller ID for the incoming call
matches the number programmed for the extension
2. Checks to ensure that the Type of Call (internal or ex-
ternal) has been configured
3. Checks the time settings..
Required: Programming Mode must be active (*95
31994). The extension has permission for a conditional
Call Forwarding.
Enter the code for programming.
0 9 7
...
Enter the number of digits that can be programmed for
5 0
extensions with permission (default is 5).
Initial state for Programming Mode.
This configuration is available through a CTI inter-
face
Conditional Call Forwarding has priority over an
unconditional Call Forwarding.
Conditional Call Forwarding cannot be used on a
S extension.
0
Programming an Extension
71