Audio Quality; Message/Greeting For An External Analog Line - Siemens HiPath 1100 Programming Manual

EVM Module
Step by Step
or
7 4 9 1
164
Enter the code for programming.
2 1 6
or
1 2 Enter the number of the mailbox you would like to se-
lect.
Enter a virtual port for auto-answering.
7 4 9 2
Press this key.
#
Initial state for Programming Mode.

Audio Quality

This setting specifies the audio quality for playing back
greetings and messages.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 2 8
1 ... 3 Select the audio quality option desired.
= Best quality for greetings and messages
1
= High quality for greetings/Best for messages (De-
2
fault)
3 = High quality for greetings and messages
Initial state for Programming Mode.
Message/Greeting for an External An-
alog Line
This specifies whether a message/greeting should be
played for an external analog line.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 3 0
Enter a number for an external analog line (e.g., 801).
or Select a Message:
1 2
= Message 1
1
= Message 2
2
Press this key.
#
Initial state for Programming Mode.