External Number Registration - Siemens HiPath 1100 Programming Manual

Step by Step
1
...
0
0 1
...
0
0 1

External Number Registration

To use the DID feature each MSN must be registered to
a specific slot.
If the prefix (Code 089) for these numbers has already
been configured, only the final digits need to be regis-
tered.
By default, no digits are specified.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
9 1
Enter the slot (001... 140).
1 4 0
Enter the MSN (up to 20 digits).
Press this key to confirm the entry.
#
(After entering 20 digits, the entry mode exits automat-
ically.)
Enter the next slot.
1 4 0
or
Press this key.
#
Initial state for Programming Mode.
Programming a Digital Trunk
149