Removing An Sd Card - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Step 5 Insert the SATADOM vertically into the connector on the mainboard. See
Figure 7-97 Installing a SATADOM
Step 6 Install the chassis cover. For details, see
Step 7 Install the 5288 V3. For details, see
Step 8 Connect all internal cables such as power and network cables. For details, see
External
Step 9 Power on the 5288 V3. For details, see
----End
Verification
1.
2.
3.

7.47 Removing an SD Card

Remove a Secure Digital (SD) card before replacing it with a new one.
Issue 26 (2018-11-19)
Cables.
Start the server. When the BIOS startup screen is displayed, press Delete to start the
BIOS Setup Utility.
Enter a BIOS password when prompted.
Choose Advanced > PCH SATA Configuration and press Enter.
Check the component information to verify whether the replacement is successful.
SATADOM 1 and SATADOM 2 correspond to Serial ATA Port 4 and Serial ATA Port
5 respectively.
Copyright © Huawei Technologies Co., Ltd.
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
7 Replacing Parts
Figure 7-97.
Cover.
3.5 Connecting
Server.
213