Huawei 5288 V3 V100R003 User Manual page 266

5288 V3 Server
User Guide
Figure 9-11 The Remote Virtual Console of the server
l
Issue 26 (2018-11-19)
The Remote Virtual Console of the server is displayed, as shown in
Logging In to a Server Using the Independent Remote Console (Mac)
a. Configure an IP address for the client (PC) to enable communication between the
client and the iBMC. That is, the IP address configured and the iBMC management
network port IP address must be in the same network segment.
b. Open the console, and set the folder, in which the independent remote console is
stored, as the working folder.
c. Run the chmod 777 KVM.sh command to set the permission for the independent
remote console.
d. Run ./KVM.sh to start the independent remote console. The independent remote
console interface is displayed, as shown in
Copyright © Huawei Technologies Co., Ltd.
9 Common Operations
Figure
Figure 9-12.
9-11.
256