Logging In To The Ibmc Cli - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Figure 9-4 Logging in to iBMC
Step 5 On the login page, enter the user name and password for logging in to the iBMC WebUI.
Step 6 Select This iBMC from the Domain drop-down list.
Step 7 Click Log In.
The Information Summary page is displayed, showing the user name in the upper right
corner.
----End

9.3 Logging In to the iBMC CLI

You can log in to the iBMC CLI to manage and monitor the device. There are different ways
to access the CLI of the management software. Choose a way based on site requirements.
To log in to the iBMC CLI over the network port, ensure that:
l
l
Prepare the following data before logging in to the iBMC CLI:
Issue 26 (2018-11-19)
NOTE
l If the message "There is a problem with this website's security certificate" is displayed, click
Continue to this website (not recommended).
l If the system displays the Security Alert dialog box indicating a certificate error, click Yes.
NOTE
Your user account will be locked after five consecutive login failures with wrong passwords. If your user
account is locked, log in again 5 minutes later.
The network port on the client is properly connected to the management network port on
the server by using a network cable.
The IP addresses of the client network port and the management network port are on the
same network segment.
Copyright © Huawei Technologies Co., Ltd.
9 Common Operations
248